Ngwaahịa
Acrylonitrile maka PAN
Acrylonitrile maka PAN,
Acrylonitrile maka Polyacrylonitrile, Acrylonitrile maka eriri polyacrylonitrile,
Polyacrylonitrile (PAN) bụ polymer sịntetik nwere usoro ahịrị (C3H3N) n.Ọ bụ ezie na ọ bụ thermoplastic ọ naghị agbaze n'okpuru ọnọdụ nkịtị, ebe ọ bụ na ọ na-agbada tupu agbaze na n'elu 300 Celsius.Ihe fọrọ nke nta ka ọ bụrụ resin PAN niile bụ copolymers sitere na ngwakọta nke monomers, yana acrylonitrile dị ka isi akụrụngwa.Ọ bụ polymer vasatail eji emepụta ọtụtụ ngwaahịa dị iche iche, gụnyere eriri maka textiles, ultra-filtration membranes, oghere oghere maka reverse osmosis, wdg. PAN fibers bụ ihe mmalite na mmepụta nke eriri carbon dị elu.
Njirimara ngwaahịa
| Aha ngwaahịa | Acrylonitrile |
| Aha Ọzọ | 2-Propenenitrile, Acrylonitrile |
| Usoro ihe omimi | C3H3N |
| CAS Mba | 107-13-1 |
| EINECS Mba | 203-466-5 |
| UN NO | 1093 |
| Koodu Hs | 292610000 |
| Ibu molekụla | 53.1 g / mol |
| Njupụta | 0.81 g/cm3 na 25 ℃ |
| Ebe esi nri | 77.3 ℃ |
| Ebe mgbaze | -82 ℃ |
| Uzuoku mgbali | 100 torr na 23 ℃ |
| Solubility Solubility na isopropanol, ethanol, ether, acetone, na ihe ngbanwe benzene | 1 ppm = 2.17 mg/m3 na 25 ℃ |
| Ịdị ọcha | 99.5% |
| Ọdịdị | Mmiri mmiri na-enweghị atụ |
| Ngwa | A na-eji polyacrylonitrile, rọba nitrile, akwa akwa, resins sịntetik. |
Asambodo nyocha
| Nwalee | Ihe | Nsonaazụ ọkọlọtọ |
| Ọdịdị | Mmiri mmiri na-enweghị atụ | |
| Agba APHA Pt-Co :≤ | 5 | 5 |
| acidity (acetic acid) mg/kg ≤ | 20 | 5 |
| PH (5% ngwọta mmiri) | 6.0-8.0 | 6.8 |
| Uru titration (5% ngwọta mmiri) ≤ | 2 | 0.1 |
| Mmiri | 0.2-0.45 | 0.37 |
| Uru Aldehydes (acetaldehyde) (mg/kg) ≤ | 30 | 1 |
| Uru Cyanogens (HCN) ≤ | 5 | 2 |
| Peroxide (hydrogen peroxide) (mg/kg) ≤ | 0.2 | 0.16 |
| Fe (mg/kg) ≤ | 0.1 | 0.02 |
| Cu (mg/kg) ≤ | 0.1 | 0.01 |
| Acrolein (mg/kg) ≤ | 10 | 2 |
| Acetone na-eme ka ọ bụrụ ihe na-akpali akpali | 80 | 8 |
| Acetonitrile (mg/kg) ≤ | 150 | 5 |
| Propionitrile (mg/kg) ≤ | 100 | 2 |
| Oxazole (mg/kg) ≤ | 200 | 7 |
| Methylacrylonitrile (mg/kg) ≤ | 300 | 62 |
| Ọdịnaya Acrylonitrile (mg/kg) ≥ | 99.5 | 99.7 |
| Oke esi (na 0.10133MPa) ℃ | 74.5-79.0 | 75.8-77.1 |
| Polymerization inhibitor (mg/kg) | 35-45 | 38 |
| Mmechi | Nsonaazụ dabara na nguzo ụlọ ọrụ | |
Ngwugwu na nnyefe
Ngwa ngwaahịa
A na-emepụta Acrylonitrile n'ahịa ahịa site na propylene ammoxidation, nke propylene, amonia, na ikuku na-emeghachi omume site na ihe na-eme ka ọ dị n'àkwà mmiri.A na-eji Acrylonitrile mee ihe n'ụzọ bụ isi dị ka onye na-emekọ ihe ọnụ na mmepụta nke acrylic na modacrylic fibers.Ihe eji eme ihe na-agụnye mmepụta plastik, mkpuchi elu, nitrile elastomer, resins mgbochi, na adhesives.Ọ bụkwa kemịkalụ kemịkalụ na njikọ nke antioxidants dị iche iche, ọgwụ, e ji esiji ákwà, na elu-arụ ọrụ.
1. Acrylonitrile mere nke polyacrylonitrile eriri, ya bụ acrylic eriri.
2. Acrylonitrile na butadiene nwere ike copolymerized iji mepụta roba nitrile.
3. Acrylonitrile, butadiene, styrene copolymerized iji kwadebe ABS resin.
4. Acrylonitrile hydrolysis nwere ike ịmepụta acrylamide, acrylic acid na esters ya.
